Wonderfire Eclipse 654 Bedienungsanleitung PDF herunterladen (Seite 39)

INSTALLER’S GUIDE

Page 39

4. Remove the six screws from the side of the

inner reflector (See figure 42).

5. Carefully lift the inner reflector and pull

forward to remove. Be careful not to

scratch the top surface of the burner

cover (See figure 42). Place the inner

reflector in a safe place away from the

work area.

6. Remove the two screws to the side of the

burner cover (See figure 43)

7. Detach the burner cover by lifting clear of

the burner module (See figure 43). Place

the burner cover in a safe place away from

the work area.

8. Isolate the gas supply at the inlet isolating

elbow

9. Support the inlet-isolating elbow to

avoid straining the pipework and

disconnect the appliance from the

elbow.

10. Detach the burner unit from the

hotbox by lifting clear

11. Replace in the reverse order

14.4 To Remove the Pilot Unit

1. Remove the burner unit - See section

14.3.

2. Detach the electrode lead from the

underside of the electrode tab

3. Detach the thermocouple from the gas

tap by unscrewing the thermocouple

nut.

4. Detach the pilot pipe from the gas tap.

5. Remove the first screw securing the

dust cage to the pilot unit & burner. Carefully remove the dust cage and place aside

(See figure 44).

6. Remove the second screw securing the pilot unit to the burner. Remove the pilot unit

and place it aside (See figure 44).

7. Disconnect the pilot pipe from the pilot unit elbow.

Figure 43 Removal of Burner Module

Figure 42 Removal of Inner reflector

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Keine Kommentare

Wonderfire Eclipse 654 Bedienungsanleitung Seite 39